International Patient Summary 1.0.0 Release
1.0 - CI Build

International Patient Summary 1.0.0 Release - Local Development build (v1.0). See the Directory of published versions

Resource Profile: IPSPregnancyOutcomeObservation - Detailed Descriptions

Draft as of 2017-04-13

Definitions for the 2.16.840.1.113883.10.22.4.28--20170413000000 resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Control1..*1
Must Supporttrue
XML RepresentationIn the XML format, this property has the namespace urn:hl7-org:v3.
2. Observation.templateId
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • value @ root,
3. Observation.templateId:primary
SliceNameprimary
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Must Supporttrue
4. Observation.templateId:primary.root
Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Fixed Value2.16.840.1.113883.10.22.4.28
5. Observation.code
BindingThe codes SHALL be taken from IPS Pregnancies SummaryThe codes SHALL be taken from ObservationType; other codes may be used where these codes are not suitable IPS Pregnancies Summar
Must Supporttrue
6. Observation.statusCode
Control10..1
Must Supporttrue
7. Observation.statusCode.code
Control0..?
XML RepresentationIn the XML format, this property is represented as an attribute.
Fixed Valuecompleted
8. Observation.value
Control10..1*
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition

Base definition for all types defined in FHIR type system.

Control0..*
Must Supporttrue
XML RepresentationIn the XML format, this property has the namespace urn:hl7-org:v3.
2. Observation.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassObservation
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
3. Observation.moodCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
4. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • value @ root,
5. Observation.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Must Supporttrue
6. Observation.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Fixed Value2.16.840.1.113883.10.22.4.28
7. Observation.code
Definition

Describes what was observed. Sometimes this is called the observation "name".

Control1..1
BindingThe codes SHALL be taken from IPS Pregnancies SummaryFor example codes, see LOINCCodes

IPS Pregnancies Summary

Codes identifying names of simple observations.

Typehttp://hl7.org/fhir/cda/StructureDefinition/CDCodeableConcept
Must Supporttrue
XML RepresentationThe type of this property is determined using the xsi:type attribute.
Requirements

Knowing what kind of observation is being made is essential to understanding the observation.

Alternate NamesName
Comments

All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

8. Observation.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Must Supporttrue
9. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Fixed Valuecompleted
10. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
11. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
12. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
13. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
14. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
15. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
16. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
17. Observation.value
Control1..1
TypeChoice of: http://hl7.org/fhir/cda/StructureDefinition/BL, http://hl7.org/fhir/cda/StructureDefinition/ED, http://hl7.org/fhir/cda/StructureDefinition/ST, http://hl7.org/fhir/cda/StructureDefinition/CD, http://hl7.org/fhir/cda/StructureDefinition/CV, http://hl7.org/fhir/cda/StructureDefinition/CE, http://hl7.org/fhir/cda/StructureDefinition/SC, http://hl7.org/fhir/cda/StructureDefinition/II, http://hl7.org/fhir/cda/StructureDefinition/TEL, http://hl7.org/fhir/cda/StructureDefinition/AD, http://hl7.org/fhir/cda/StructureDefinition/EN, http://hl7.org/fhir/cda/StructureDefinition/INT, http://hl7.org/fhir/cda/StructureDefinition/REAL, http://hl7.org/fhir/cda/StructureDefinition/PQ, http://hl7.org/fhir/cda/StructureDefinition/MO, http://hl7.org/fhir/cda/StructureDefinition/TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS, http://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
XML RepresentationThe type of this property is determined using the xsi:type attribute.

Guidance on how to interpret the contents of this table can be found here.

1. Observation
Definition

Base definition for all types defined in FHIR type system.

Control0..*
Must Supporttrue
XML RepresentationIn the XML format, this property has the namespace urn:hl7-org:v3.
2. Observation.classCode
Control1..1
BindingThe codes SHALL be taken from ActClassObservation
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
3. Observation.moodCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
4. Observation.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
5. Observation.realmCode
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
6. Observation.typeId
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
7. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
  • value @ root,
8. Observation.templateId:primary
SliceNameprimary
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
Must Supporttrue
9. Observation.templateId:primary.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
10. Observation.templateId:primary.assigningAuthorityName
Definition

A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
11. Observation.templateId:primary.displayable
Definition

Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
12. Observation.templateId:primary.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Fixed Value2.16.840.1.113883.10.22.4.28
13. Observation.templateId:primary.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
14. Observation.id
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/II
15. Observation.code
Control1..1
BindingThe codes SHALL be taken from IPS Pregnancies Summary IPS Pregnancies Summar
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
Must Supporttrue
XML RepresentationThe type of this property is determined using the xsi:type attribute.
16. Observation.derivationExpr
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ST
17. Observation.text
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
XML RepresentationThe type of this property is determined using the xsi:type attribute.
18. Observation.statusCode
Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
Must Supporttrue
19. Observation.statusCode.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from NullFlavor
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
20. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Fixed Valuecompleted
21. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
22. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
23. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
24. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
25. Observation.statusCode.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSet.
26. Observation.statusCode.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual name valueSetVersion.
27. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/ED
28. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CR
29. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
XML RepresentationThe type of this property is determined using the xsi:type attribute.
30. Observation.effectiveTime
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-TS
31. Observation.priorityCode
Control0..1
BindingThe codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
32. Observation.repeatNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/IVL-INT
33. Observation.languageCode
Control0..1
BindingThe codes SHALL be taken from HumanLanguage
Typehttp://hl7.org/fhir/cda/StructureDefinition/CS
34. Observation.value
Control1..1
TypeChoice of: http://hl7.org/fhir/cda/StructureDefinition/BL, http://hl7.org/fhir/cda/StructureDefinition/ED, http://hl7.org/fhir/cda/StructureDefinition/ST, http://hl7.org/fhir/cda/StructureDefinition/CD, http://hl7.org/fhir/cda/StructureDefinition/CV, http://hl7.org/fhir/cda/StructureDefinition/CE, http://hl7.org/fhir/cda/StructureDefinition/SC, http://hl7.org/fhir/cda/StructureDefinition/II, http://hl7.org/fhir/cda/StructureDefinition/TEL, http://hl7.org/fhir/cda/StructureDefinition/AD, http://hl7.org/fhir/cda/StructureDefinition/EN, http://hl7.org/fhir/cda/StructureDefinition/INT, http://hl7.org/fhir/cda/StructureDefinition/REAL, http://hl7.org/fhir/cda/StructureDefinition/PQ, http://hl7.org/fhir/cda/StructureDefinition/MO, http://hl7.org/fhir/cda/StructureDefinition/TS, http://hl7.org/fhir/cda/StructureDefinition/IVL-PQ, http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS, http://hl7.org/fhir/cda/StructureDefinition/RTO-PQ-PQ
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
XML RepresentationThe type of this property is determined using the xsi:type attribute.
35. Observation.interpretationCode
Control0..*
BindingThe codes SHALL be taken from ObservationInterpretation
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
36. Observation.methodCode
Control0..*
BindingThe codes SHALL be taken from ObservationMethod; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
37. Observation.targetSiteCode
Definition

Drawn from concept domain ActSite

Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/CD
38. Observation.subject
Control0..1
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Observation.subject.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typeid
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
40. Observation.subject.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
41. Observation.subject.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationTargetSubject
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueSBJ
Fixed ValueSBJ
42. Observation.subject.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
43. Observation.subject.awarenessCode
Control0..1
BindingThe codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable
Typehttp://hl7.org/fhir/cda/StructureDefinition/CE
44. Observation.subject.relatedSubject
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedSubject
45. Observation.specimen
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Specimen
46. Observation.performer
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Performer2
47. Observation.author
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Author
48. Observation.informant
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. Observation.informant.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typeid
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
50. Observation.informant.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
51. Observation.informant.typeCode
Control1..1
BindingThe codes SHALL be taken from ParticipationInformationGenerator
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueINF
Fixed ValueINF
52. Observation.informant.contextControlCode
Control1..1
BindingThe codes SHALL be taken from ContextControl
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueOP
Fixed ValueOP
53. Observation.informant.assignedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/AssignedEntity
54. Observation.informant.relatedEntity
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RelatedEntity
55. Observation.participant
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Participant2
56. Observation.entryRelationship
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
obs-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1)
57. Observation.entryRelationship.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typeid
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
58. Observation.entryRelationship.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
59. Observation.entryRelationship.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
60. Observation.entryRelationship.inversionInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
61. Observation.entryRelationship.contextConductionInd
Control1..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
Default Valuetrue
62. Observation.entryRelationship.sequenceNumber
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/INT
63. Observation.entryRelationship.negationInd
Control0..1
Typeboolean
XML RepresentationIn the XML format, this property is represented as an attribute.
64. Observation.entryRelationship.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
65. Observation.entryRelationship.observation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Observation
66. Observation.entryRelationship.regionOfInterest
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest
67. Observation.entryRelationship.observationMedia
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationMedia
68. Observation.entryRelationship.substanceAdministration
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration
69. Observation.entryRelationship.supply
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Supply
70. Observation.entryRelationship.procedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Procedure
71. Observation.entryRelationship.encounter
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Encounter
72. Observation.entryRelationship.organizer
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Organizer
73. Observation.entryRelationship.act
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/Act
74. Observation.reference
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
75. Observation.reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typeid
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
76. Observation.reference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
77. Observation.reference.typeCode
Control1..1
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
78. Observation.reference.seperatableInd
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/BL
79. Observation.reference.externalAct
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalAct
80. Observation.reference.externalObservation
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalObservation
81. Observation.reference.externalProcedure
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure
82. Observation.reference.externalDocument
Control0..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ExternalDocument
83. Observation.precondition
Control0..*
Typehttp://hl7.org/fhir/cda/StructureDefinition/Precondition
84. Observation.referenceRange
Control0..*
TypeElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
85. Observation.referenceRange.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typeid
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
86. Observation.referenceRange.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.referenceRange.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
87. Observation.referenceRange.typeCode
Control1..1
BindingThe codes SHALL be taken from ActRelationshipPertains
Typecode
XML RepresentationIn the XML format, this property is represented as an attribute.
Default ValueREFV
Fixed ValueREFV
88. Observation.referenceRange.observationRange
Control1..1
Typehttp://hl7.org/fhir/cda/StructureDefinition/ObservationRange