International Patient Summary 1.0.0 Release - Local Development build (v1.0). See the Directory of published versions
Draft as of 2022-07-15 |
Definitions for the 2.16.840.1.113883.10.22.4.39--20220715135511 resource profile.
Guidance on how to interpret the contents of this table can be found here.
1. Act | |
Control | 1..*1 |
XML Representation | In the XML format, this property has the namespace urn:hl7-org:v3 . |
2. Act.classCode | |
XML Representation | In the XML format, this property is represented as an attribute. |
Fixed Value | ACT |
3. Act.moodCode | |
XML Representation | In the XML format, this property is represented as an attribute. |
Pattern Value | PRP |
4. Act.templateId | |
Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
5. Act.templateId:primary | |
SliceName | primary |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Must Support | true |
6. Act.templateId:primary.root | |
Control | 1..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Fixed Value | 2.16.840.1.113883.10.22.4.39 |
7. Act.id | |
Must Support | true |
8. Act.code | |
Must Support | true |
9. Act.text | |
Definition | The element if present points to the text describing the problem being recorded; including any dates, comments, et cetera. The contains a URI in value attribute. This URI points to the free text description of the problem in the document that is being described. |
Must Support | true |
10. Act.text.reference | |
Control | 1..1 |
Must Support | true |
11. Act.text.reference.value | |
Definition | When used it shall refer to the narrative, typically #{label}-{generated-id}, e.g. #xxx-1 |
Control | 1..1 |
Type | uri |
XML Representation | In the XML format, this property is represented as an attribute. |
12. Act.statusCode | |
Control | 10..1 |
Binding | The codes SHALL be taken from ActStatusThe codes SHALL be taken from ActStatus ActStatu |
Must Support | true |
13. Act.effectiveTime | |
Must Support | true |
14. Act.performer | |
15. Act.author |
Guidance on how to interpret the contents of this table can be found here.
1. Act | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 0..* |
XML Representation | In the XML format, this property has the namespace urn:hl7-org:v3 . |
2. Act.classCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Fixed Value | ACT |
3. Act.moodCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Pattern Value | PRP |
4. Act.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
5. Act.templateId:primary | |
SliceName | primary |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Must Support | true |
6. Act.templateId:primary.root | |
Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
Control | 1..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Fixed Value | 2.16.840.1.113883.10.22.4.39 |
7. Act.id | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Must Support | true |
8. Act.code | |
Control | 1..1 |
Binding | The codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
Must Support | true |
9. Act.text | |
Definition | The element if present points to the text describing the problem being recorded; including any dates, comments, et cetera. The contains a URI in value attribute. This URI points to the free text description of the problem in the document that is being described. |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
Must Support | true |
10. Act.text.reference | |
Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/TEL |
Must Support | true |
11. Act.text.reference.value | |
Definition | When used it shall refer to the narrative, typically #{label}-{generated-id}, e.g. #xxx-1 |
Control | 1..1 |
Type | uri |
XML Representation | In the XML format, this property is represented as an attribute. |
12. Act.statusCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ActStatus ActStatu |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
Must Support | true |
13. Act.effectiveTime | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
Must Support | true |
14. Act.performer | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
15. Act.author | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
Guidance on how to interpret the contents of this table can be found here.
1. Act | |
Definition | Base definition for all types defined in FHIR type system. |
Control | 0..* |
XML Representation | In the XML format, this property has the namespace urn:hl7-org:v3 . |
2. Act.classCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Fixed Value | ACT |
3. Act.moodCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Pattern Value | PRP |
4. Act.realmCode | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
5. Act.typeId | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
6. Act.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
7. Act.templateId:primary | |
SliceName | primary |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Must Support | true |
8. Act.templateId:primary.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from NullFlavor |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
9. Act.templateId:primary.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
10. Act.templateId:primary.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
11. Act.templateId:primary.root | |
Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
Control | 1..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Fixed Value | 2.16.840.1.113883.10.22.4.39 |
12. Act.templateId:primary.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
13. Act.id | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Must Support | true |
14. Act.code | |
Control | 1..1 |
Binding | The codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
Must Support | true |
15. Act.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
16. Act.text | |
Definition | The element if present points to the text describing the problem being recorded; including any dates, comments, et cetera. The contains a URI in value attribute. This URI points to the free text description of the problem in the document that is being described. |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
Must Support | true |
17. Act.text.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from NullFlavor |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
18. Act.text.charset | |
Definition | For character-based encoding types, this property specifies the character set and character encoding used. The charset shall be identified by an Internet Assigned Numbers Authority (IANA) Charset Registration [] in accordance with RFC 2978 []. |
Control | 0..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
19. Act.text.compression | |
Definition | Indicates whether the raw byte data is compressed, and what compression algorithm was used. |
Control | 0..1 |
Binding | The codes SHALL be taken from CompressionAlgorithm |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
20. Act.text.integrityCheck | |
Definition | The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created. |
Control | 0..1 |
Type | base64Binary |
XML Representation | In the XML format, this property is represented as an attribute. |
21. Act.text.integrityCheckAlgorithm | |
Definition | Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage. |
Control | 0..1 |
Binding | The codes SHALL be taken from IntegrityCheckAlgorithm |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
22. Act.text.language | |
Definition | For character based information the language property specifies the human language of the text. |
Control | 0..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
23. Act.text.mediaType | |
Definition | Identifies the type of the encapsulated data and identifies a method to interpret or render the data. |
Control | 0..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
24. Act.text.representation | |
Control | 0..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
25. Act.text.data[x] | |
Definition | Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.) |
Control | 0..1 |
Type | Choice of: string, base64Binary |
[x] Note | See Choice of Data Types for further information about how to use [x] |
XML Representation | In the XML format, this property is represented as unadorned text. |
26. Act.text.reference | |
Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/TEL |
Must Support | true |
27. Act.text.reference.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from NullFlavor |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
28. Act.text.reference.value | |
Definition | When used it shall refer to the narrative, typically #{label}-{generated-id}, e.g. #xxx-1 |
Control | 1..1 |
Type | uri |
XML Representation | In the XML format, this property is represented as an attribute. |
29. Act.text.reference.useablePeriod | |
Definition | Specifies the periods of time during which the telecommunication address can be used. For a telephone number, this can indicate the time of day in which the party can be reached on that telephone. For a web address, it may specify a time range in which the web content is promised to be available under the given address. |
Control | 0..* |
Type | Choice of: http://hl7.org/fhir/cda/StructureDefinition/IVL-TS, http://hl7.org/fhir/cda/StructureDefinition/EIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/PIVL-TS, http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS |
Default Type | http://hl7.org/fhir/cda/StructureDefinition/SXPR-TS |
XML Representation | The type of this property is determined using the xsi:type attribute. |
30. Act.text.reference.use | |
Definition | One or more codes advising a system or user which telecommunication address in a set of like addresses to select for a given telecommunication need. |
Control | 0..* |
Binding | The codes SHALL be taken from AddressUse |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
31. Act.text.thumbnail | |
Definition | An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference. |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
32. Act.statusCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ActStatus ActStatu |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
Must Support | true |
33. Act.effectiveTime | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
Must Support | true |
34. Act.priorityCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
35. Act.languageCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from HumanLanguage |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
36. Act.subject | |
Control | 0..1 |
Type | Element |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
37. Act.subject.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | id |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
38. Act.subject.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.subject.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
39. Act.subject.typeCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ParticipationTargetSubject |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | SBJ |
Fixed Value | SBJ |
40. Act.subject.contextControlCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ContextControl |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | OP |
Fixed Value | OP |
41. Act.subject.awarenessCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
42. Act.subject.relatedSubject | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
43. Act.specimen | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
44. Act.performer | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
45. Act.author | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
46. Act.informant | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
47. Act.informant.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | id |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
48. Act.informant.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.informant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
49. Act.informant.typeCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ParticipationInformationGenerator |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | INF |
Fixed Value | INF |
50. Act.informant.contextControlCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ContextControl |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | OP |
Fixed Value | OP |
51. Act.informant.assignedEntity | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
52. Act.informant.relatedEntity | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
53. Act.participant | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
54. Act.entryRelationship | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
55. Act.entryRelationship.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | id |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
56. Act.entryRelationship.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.entryRelationship.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
57. Act.entryRelationship.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
58. Act.entryRelationship.inversionInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
59. Act.entryRelationship.contextConductionInd | |
Control | 1..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
Default Value | true |
60. Act.entryRelationship.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
61. Act.entryRelationship.negationInd | |
Control | 0..1 |
Type | boolean |
XML Representation | In the XML format, this property is represented as an attribute. |
62. Act.entryRelationship.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
63. Act.entryRelationship.observation | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
64. Act.entryRelationship.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
65. Act.entryRelationship.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
66. Act.entryRelationship.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
67. Act.entryRelationship.supply | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
68. Act.entryRelationship.procedure | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
69. Act.entryRelationship.encounter | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
70. Act.entryRelationship.organizer | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
71. Act.entryRelationship.act | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
72. Act.reference | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
73. Act.reference.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | id |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
74. Act.reference.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Act.reference.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
75. Act.reference.typeCode | |
Control | 1..1 |
Type | code |
XML Representation | In the XML format, this property is represented as an attribute. |
76. Act.reference.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
77. Act.reference.externalAct | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
78. Act.reference.externalObservation | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
79. Act.reference.externalProcedure | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
80. Act.reference.externalDocument | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
81. Act.precondition | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |